32 920
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 16 :
Ligne 16 : − + + + + + + + + + + + + + + + + + + + +
Micropython-neotrellis-mosaique (voir la source)
Version du 7 mars 2025 à 11:42
, 7 mars 2025 à 11:42→Assembler
{{ambox | text = Les images ci-dessous utilisent des Trellis (une version monochrome des NeoTrellis).<br />Le processus d'assemblage reste cependant identique. }}
{{ambox | text = Les images ci-dessous utilisent des Trellis (une version monochrome des NeoTrellis).<br />Le processus d'assemblage reste cependant identique. }}
{{ambox | text = Tous les images ci-dessous sont créditées à [https://www.adafruit.com Adafruit Industries]. All images below are credited to [https://www.adafruit.com Adafruit Industries] }}
{{ambox | text = Tous les images ci-dessous sont créditées à [https://www.adafruit.com Adafruit Industries]. All images below are credited to [https://www.adafruit.com Adafruit Industries]. }}
{{asm-begin}}
{{asm-row|img=Micropython-neotrellis-mosaique-10.png}}
{{asm-text}} There's little nubs on the sides of some PCBs that keep them on the assembly panel, you can file them off with any file or sandpaper.
{{asm-row|img=Micropython-neotrellis-mosaique-11.png}}
{{asm-text}} Arrange the tiles up the way you want, we'll start with two. Make sure the Adafruit logo is lined up the same.
{{asm-row|img=Micropython-neotrellis-mosaique-12.png}}
{{asm-text}} On the other side make sure LEDs #1 are in the same corner.
{{asm-row|img=Micropython-neotrellis-mosaique-13.png}}
{{asm-text}} Solder two blobs of solder on two adjacent finger pads.
A small wire (or a few strands of wire) might help make the bridge. Just be sure the bridge doesn't touch any of the adjacent pads.
{{asm-end}}
{{Micropython-neotrellis-TRAILER}}
{{Micropython-neotrellis-TRAILER}}