| Ligne 87 : |
Ligne 87 : |
| | # The 6.4mm central hole accross all the CanSat V2 boards to build a '''central reinforcement column'''. | | # The 6.4mm central hole accross all the CanSat V2 boards to build a '''central reinforcement column'''. |
| | | | |
| − | More information about mechanical in the [[ENG-CANSAT-V2-DIMENSION|Dimensions page]] | + | More information about mechanical in the [[ENG-CANSAT-V2-DIMENSION|Dimensions page]]. |
| − | | |
| − | {{traduction}}
| |
| − | * placed between the boards (inside).
| |
| − | * placed ouside of the boards and use a shorter ribbon (boards are enclosed right in the middle of the project).
| |
| − | | |
| − | We did also features a Qwiic/StemmaQt connector available underside. This very compact connector do features power and I2C bus. It can be used to quickly and safely connects toons of I2C capable sensors boards.
| |
| − | | |
| − | | |
| − | [[fichier:ENG-CANSAT-PICO-CONTENT-12.jpg|640px]]
| |
| − | | |
| − | Just flip over the "Cansat Pico Board" to discover additional features available underside the Pico.
| |
| − | | |
| − | As we can propotype under the board, it is also very important to have the board fully labelled this side.
| |
| − | | |
| − | [[fichier:ENG-CANSAT-PICO-CONTENT-13.jpg|640px]]
| |
| − | | |
| − | As the Raspberry-Pi Pico doesn't features Lipo battery circuitery, we do added a special connector to plug an [https://www.adafruit.com/product/1944 Adafruit PowerBoost 500 charger] on the board.
| |
| − | | |
| − | Just connect the Pico to you computer (or power it with a wall adapter) and the Lipo will auto-magically starts to charge-up.
| |
| − | | |
| − | Unplug your pico from computer and the PowerBoost charger will take over. The Lipo will discharge to power your project.
| |
| − | | |
| − | Thanks to the PowerBoost, your cansat projet do also have a 5V power rail (500 mA max).
| |
| − | | |
| − | Needs to spare energy? no problem, the "Power Off" pin is available near of the board boundary. Once the PWR_OFF tied to the ground, the PowerBoost is disabled (as Pico and the project).
| |
| − | | |
| − | [[fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
| |
| | | | |
| | == Cansat V2 Pico Kit content == | | == Cansat V2 Pico Kit content == |