32 908
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 2 :
Ligne 2 : − + Ligne 50 :
Ligne 50 : + + + +
→Power Distribution
== Power Distribution ==
== Power Distribution ==
This collect the information about the power circuitery for the Cansat V2 and the project.
This section describes the power circuitry used by Cansat V2 and the experiment.
The MCU Board (the Pico) is responsible from its own power regulation.
The MCU Board (the Pico) is responsible from its own power regulation.
{{underline|'''When another voltage required :'''}}<br />The Vbat pads are available for you to connect a step-up voltage regulator to produce higher voltage from the Lipo battery. Just keep in mind that General Lipo cannot be discharged over 1*C (meaning 1200mAh battery cannot discharge over 1*1200mA before getting the protection activated).
{{underline|'''When another voltage required :'''}}<br />The Vbat pads are available for you to connect a step-up voltage regulator to produce higher voltage from the Lipo battery. Just keep in mind that General Lipo cannot be discharged over 1*C (meaning 1200mAh battery cannot discharge over 1*1200mA before getting the protection activated).
Remarks:
* Cansat must have a minimum weight for the parachute to work efficiently. Having an additional battery may help you to achieve this while offering additional power source for hungry power deevice (like motor).
{{ENG-CANSAT-PICO-TRAILER}}
{{ENG-CANSAT-PICO-TRAILER}}