32 908
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 92 :
Ligne 92 : − + − Voltage is generated from the Lipo battery or the USB Power − + − + + + + + + + + + + + + + +
→Power Pins
{{asm-row|img=ENG-CANSAT-V2-PINOUT-3V3.jpg}}
{{asm-row|img=ENG-CANSAT-V2-PINOUT-3V3.jpg}}
{{asm-text}} 3.3V power is generated by on board regulator.
{{asm-text}} 3V pin is the 3.3V power generated by CANSAT-BASE regulator (nothing regarding with the MCU regulator).
{{asm-row|img=ENG-CANSAT-V2-PINOUT-3V3.jpg}}
The 3V3 regulator can provide a constant current of 600mA (peak to 1A).
{{asm-text}} The Lipo connector can be used to c
Lot of ground GND is made available on the MCU breakout rails (see the Blue points)
Voltage is generated either from the Lipo battery or the USB 5V power (see "Power Distribution" here upper).
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-POWER.jpg}}
{{asm-text}} 3.3V power is also made available on the Grove connectors and Qwiic/StemmaQt.
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-GROVE.jpg}}
{{asm-text}} VBus gets 5V (a bit lower) when the MCU board get external power from USB.
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-VSYS.jpg}}
{{asm-text}} VSys gets Lipo battery volatage .
{{asm-end}}
{{asm-end}}
{{ENG-CANSAT-PICO-TRAILER}}
{{ENG-CANSAT-PICO-TRAILER}}