32 908
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 100 :
Ligne 100 : + + Ligne 108 :
Ligne 110 : − + + + +
→Power Pins
Voltage is generated either from the Lipo battery or the USB 5V power (see "Power Distribution" here upper).
Voltage is generated either from the Lipo battery or the USB 5V power (see "Power Distribution" here upper).
Most of the pads are properly labelled on the silkscreen
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-POWER.jpg}}
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-POWER.jpg}}
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-VSYS.jpg}}
{{asm-row|img=ENG-CANSAT-V2-PINOUT-GROVE-VSYS.jpg}}
{{asm-text}} VSys gets Lipo battery volatage .
{{asm-text}} VSys gets Lipo battery voltage (VBat) feeding the MCU board regulator.
Together with VBat pads, Vsys & VBat are the only pins always getting voltage even when the "Power En" shutdown the CANSAT.
Think twice before connecting any power consumer device to this pin because it will infinitely drain the power.
{{asm-end}}
{{asm-end}}
{{ENG-CANSAT-PICO-TRAILER}}
{{ENG-CANSAT-PICO-TRAILER}}