32 908
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 43 :
Ligne 43 : − [[Fichier:ENG-CANSAT-V2-ASSEMBLY-20.jpg|480px]]+ − Within the CANSAT-KIT the Rapsberry-Pico is ready to use and can be plugged onto an PICO Radio board.+ − + − + + + + + − + + + − +
ENG-CANSAT-V2-ASSEMBLY (voir la source)
Version du 31 juillet 2025 à 13:56
, 31 juillet 2025 à 13:56→Assembling the base station
The base station also gets improvements. No more soldering this side too.
The base station also gets improvements. No more soldering this side too.
Within the CANSAT-KIT the Rapsberry-Pico is ready to use and can be plugged onto an PICO Radio board.
[[Fichier:ENG-CANSAT-V2-ASSEMBLY-20.jpg|360px]]
Connects the demonstration Antenna and you are ready to test.
Connects the demonstration 433 MHz Antenna and you are ready to test.
{{asm-begin}}
{{asm-begin}}
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-21.jpg}}
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-21.jpg}}
{{asm-text}} xxx
{{asm-text}} Grab the RFM69-Boot expansion for Pico.
When included within the CANSAT-KIT:
* the expansion board have the femalle header pre-soldered.
* an extra antenna conector is also included and pre-soldered.
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-22.jpg}}
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-22.jpg}}
{{asm-text}} xxxx
{{asm-text}} Grab the Pico microcontroler.
When included within the CANSAT-KIT, the header is pre-soldered on it.
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-23.jpg}}
{{asm-row|img=ENG-CANSAT-V2-ASSEMBLY-23.jpg}}
{{asm-text}} xxx
{{asm-text}} Plug them together. Notice that USB connector goes over the opening of the Pico-RFM69-BOOT.
{{asm-end}}
{{asm-end}}
{{ENG-CANSAT-PICO-TRAILER}}
{{ENG-CANSAT-PICO-TRAILER}}