1 324 octets ajoutés
, 16 avril 2013 à 20:29
{{DHTxx-NAV}}
To test the sketch, we'll use an Arduino. You can use any micrcontroller that can do microsecond timing, but since its a little tricky to code it up, we suggest verifying the wiring and sensor work with an Arduino to start.
[http://learn.adafruit.com/dht/downloads Begin by downloading the DHT library from our github repository]. To download, click the '''DOWNLOADS''' button in the top right corner. Rename the uncompressed folder '''DHT''' and make sure that it contains the '''dht.cpp''' file and others. Then drag the '''DHT''' folder into the '''arduinosketchfolder/libraries/''' folder. You may have to create that libraries sub-folder if it doesnt exist. Restart the IDE
Now load up the '''Examples->DHT->DHTtester''' sketch
[[Fichier:DHTxx-Utiliser-00.jpg]]
If you're using a '''DHT11''' sensor, comment out the line that sets the type:
<nowiki>//#define DHTTYPE DHT22 // DHT 22 (AM2302)</nowiki>
and uncomment the line that says:
<nowiki>#define DHTTYPE DHT11 // DHT 11</nowiki>
This will make the data appear correctly for the correct sensor. Upload the sketch!
[[Fichier:DHTxx-Utiliser-01.jpg]]
You should see the temperature and humidity. You can see changes by breathing onto the sensor (like you would to fog up a window) which should increase the humidity.
{{DHTxx-TRAILER}}