30 072
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
RASP-PiTFT-Assembler (voir la source)
Version du 12 décembre 2013 à 22:37
, 12 décembre 2013 à 22:37Page créée avec « {{RASP-PiTFT-NAV}} Before you start check that you have the parts you need: an assembled PiTFT plate with the 2.8" screen, extra tall female header and the 2x13 male header... »
{{RASP-PiTFT-NAV}}
Before you start check that you have the parts you need: an assembled PiTFT plate with the 2.8" screen, extra tall female header and the 2x13 male header. Note that it is normal for the screen to be 'loose' - this is so its easier for you to solder the connector on!
Check also on the back that the TFT is attached and that the flex connector is seated into the onboard FPC socket.
{{RASP-PiTFT-TRAILER}}
Before you start check that you have the parts you need: an assembled PiTFT plate with the 2.8" screen, extra tall female header and the 2x13 male header. Note that it is normal for the screen to be 'loose' - this is so its easier for you to solder the connector on!
Check also on the back that the TFT is attached and that the flex connector is seated into the onboard FPC socket.
{{RASP-PiTFT-TRAILER}}