29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Page créée avec « {{LCD-USB-TTL-NAV}} {{bloc-etroit|text=The first step is to solder a character LCD display onto the backpack. Remember that only character type displays are supported, and t... »
{{LCD-USB-TTL-NAV}}
{{bloc-etroit|text=The first step is to solder a character LCD display onto the backpack. Remember that only character type displays are supported, and they can be up to 20x4 in size but no larger. Tous les autres afficheurs LCD de type "caractère" vendu chez MCHobby devraient fonctionner mais nous ne pouvons pas le garantir pour des produits ne provenant pas de notre WebShop!}}
{{ambox-stop|text=If you buy a kit from adafruit you may get an extra blue 10K potentiometer. This part isn't required for this kit so you can use it for another project!}}
{{asm-begin}}
{{asm-row|img=LCD-USB-TTL-Asm-00.jpg}}
{{asm-text}} The backpack comes with a piece of header you can use to fit the display on. Its handy to have a solderless breadboard to attach the header on straight.
Your kit may also come with a blue 3-pin potentiometer, this part is not required, you can simply recycle it into another project.
{{asm-row|img=LCD-USB-TTL-Asm-01.jpg}}
{{asm-text}} Break off the header so that it matches the number of pins on your LCD.
Autre ligne
* Et bullet list :-)
{{asm-end}}
__asm-img|img=part-item-pi.jpg__
{{LCD-USB-TTL-TRAILER}}
{{bloc-etroit|text=The first step is to solder a character LCD display onto the backpack. Remember that only character type displays are supported, and they can be up to 20x4 in size but no larger. Tous les autres afficheurs LCD de type "caractère" vendu chez MCHobby devraient fonctionner mais nous ne pouvons pas le garantir pour des produits ne provenant pas de notre WebShop!}}
{{ambox-stop|text=If you buy a kit from adafruit you may get an extra blue 10K potentiometer. This part isn't required for this kit so you can use it for another project!}}
{{asm-begin}}
{{asm-row|img=LCD-USB-TTL-Asm-00.jpg}}
{{asm-text}} The backpack comes with a piece of header you can use to fit the display on. Its handy to have a solderless breadboard to attach the header on straight.
Your kit may also come with a blue 3-pin potentiometer, this part is not required, you can simply recycle it into another project.
{{asm-row|img=LCD-USB-TTL-Asm-01.jpg}}
{{asm-text}} Break off the header so that it matches the number of pins on your LCD.
Autre ligne
* Et bullet list :-)
{{asm-end}}
__asm-img|img=part-item-pi.jpg__
{{LCD-USB-TTL-TRAILER}}