Modifications

[[Fichier:Trinket-Pro-Decouverte-00.jpg|640px]]

[[Fichier:Trinket-Pro-Decouverte-00.jpg|640px]]

Let me take you on a tour of your Trinket! Each trinket is assembled here at Adafruit and comes chock-full of good design to make it a joy to use.

Faisons donc un petit tour du Trinket Pro! Chaque Trinket est assembler chez AdaFruit et est livré totalement assemblé (sauf le pin Header) et inclus toute une série de matériel pour offrir un maximum de joie d'utilisation.

* '''Micro-B USB connector''' - We went with the ultra-common micro-B USB connector for power and/or USB bootloading. We use a special half SMT/half thru hole connector with extra big pads so the connector is very strong. It's also a proper USB connector, so you can use any length cable. Don't forget to use a data+power USB cable if you want to bootload! Some really inexpensive USB cables are 'power  

* '''Micro-B USB connector''' - We went with the ultra-common micro-B USB connector for power and/or USB bootloading. We use a special half SMT/half thru hole connector with extra big pads so the connector is very strong. It's also a proper USB connector, so you can use any length cable. Don't forget to use a data+power USB cable if you want to bootload! Some really inexpensive USB cables are 'power  

* '''Green Power LED''' - you'll know that the board is powered up when this bright LED is lit

* '''Green Power LED''' - you'll know that the board is powered up when this bright LED is lit