Ligne 212 : |
Ligne 212 : |
| | | |
| == Cartes MiFare Ultralight == | | == Cartes MiFare Ultralight == |
− | MiFare Ultralight cards typically contain 512 bits (64 bytes) of memory, including 4 bytes (32-bits) of OTP (One Time Programmable) memory where the individual bits can be written but not erased. | + | Les cartes MiFare Ultralight contiennent 512 bits (64 octets) de mémoire, incluant 4 octets (32-bits) de mémoire OTP (One Time Programmable) où chaque bit peut être écrit individuellement mais pas effacé. |
| | | |
− | * [http://www.nxp.com/documents/data_sheet/MF0ICU1.pdf MF0ICU1 MiFare Ultralight Functional Specification] (''pdf, NXP'') | + | * [http://www.nxp.com/documents/data_sheet/MF0ICU1.pdf Spécifications Fonctionnelles MF0ICU1 MiFare Ultralight] (''pdf, NXP'') |
| | | |
− | MiFare Ultralight cards have a 7-byte UID that uniquely identifies the card. | + | Les cartes MiFare Ultralight dispose d'une identification unique de la carte codé sur 7-octets (UID). |
| | | |
| === Mémoire EEPROM === | | === Mémoire EEPROM === |
− | MiFare Ultralight cards have 512 bits (64 bytes) of EEPROM memory, including 4 byte (32 bits) of OTP memory. Unlike Mifare Classic cards, there is no authentication on a per block level, although the blocks can be set to "read-only" mode using Lock Bytes (described below). | + | Les cartes MiFare Ultralight contiennent 512 bits (64 octets) de mémoire EEPROM, incluant 4 octets (32 bits) de mémoire OTP. A l'opposé des cartes Mifare Classic, celle-cis n'ont pas d'authentification au "niveau du bloc", un bloc peut néanmoins est placé en "lecture seule" (''read-only'') en utilisant les octets de blocages/''Lock Bytes'' décris ci-dessous. |
| | | |
− | EEPROM memory is organised into 16 pages of four bytes eachs, in the following order: | + | La mémoire EEPROM est organisée en 16 page ayant chacune 4 octets. Ces pages sont organisés dans l'ordre suivant: |
| | | |
| <nowiki> Page Description | | <nowiki> Page Description |
Ligne 227 : |
Ligne 227 : |
| 0 Numéro de série (4 bytes/octets) | | 0 Numéro de série (4 bytes/octets) |
| 1 Numéro de série (4 bytes/octets) | | 1 Numéro de série (4 bytes/octets) |
− | 2 Byte 0: Numéro de série | + | 2 Octet 0: Numéro de série |
− | Byte 1: Mémoire Interne | + | Octet 1: Mémoire Interne |
− | Byte 2..3: Octets de blocage/lock bytes | + | Octet 2..3: Octets de blocage/lock bytes |
| 3 Mémoire programmable un seule fois/OTP memory (4 octets/bytes) | | 3 Mémoire programmable un seule fois/OTP memory (4 octets/bytes) |
| 4..15 Mémoire utilisateur (4 octets/bytes)</nowiki> | | 4..15 Mémoire utilisateur (4 octets/bytes)</nowiki> |
| | | |
− | Here are the pages and blocks arranged in table format:
| + | Voici les pages et les blocs arrangés sous forme de table (chaque bloc fait 1 octets): |
| | | |
| <nowiki> Page Bloc 0 Bloc 1 Bloc 2 Bloc 3 | | <nowiki> Page Bloc 0 Bloc 1 Bloc 2 Bloc 3 |
Ligne 255 : |
Ligne 255 : |
| | | |
| === Lock Bytes (page 2) === | | === Lock Bytes (page 2) === |
| + | {{traduction}} |
| Lock Bytes sont les octets de blocage. Pour rappel, un ''Byte'' (''anglais'') est un ''octet'' (Français) et contient 8 bits. | | Lock Bytes sont les octets de blocage. Pour rappel, un ''Byte'' (''anglais'') est un ''octet'' (Français) et contient 8 bits. |
| | | |