Modifications

== Utiliser un connecteur JST ==

== Utiliser un connecteur JST ==

If you don't want to solder wires directly, you can solder on a ***link*** JST PH 2-pin connector to the back. We don't include this on the board because its a bit bulky and if the JST is in place you can snap a battery in or out easily. The connector is the same as the Vin/GND pins on the side so use one or the other!

If you don't want to solder wires directly, you can solder on a ***link***{{pl|537|connecteur JST PH 2-broche}} connector to the back. We don't include this on the board because its a bit bulky and if the JST is in place you can snap a battery in or out easily. The connector is the same as the Vin/GND pins on the side so use one or the other!

{{ADFImage|ADAFRUIT-AUDIO-FX-Alimentation-20.jpg|640px}}

{{ADFImage|ADAFRUIT-AUDIO-FX-Alimentation-20.jpg|640px}}