29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 2 :
Ligne 2 : + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
aucun résumé de modification
{{traduction}}
{{traduction}}
== Assemblage ==
We ship Feathers fully tested but without headers attached - this gives you the most flexibility on choosing how to use and configure your Feather
== L'option pinHeader & connecteur ==
Before you go gung-ho on soldering, there's a few options to consider!
<small>Toutes les images ci-dessous sont créditées à [http://www.adafruit.com Adafruit Industries] - Credit to [http://www.adafruit.com Adafruit Industries] for all the images here under</small>
{{asm-begin}}
{{asm-row|img=FEATHER-M0-Assembler-01.jpg}}
{{asm-text}} The first option is soldering in plain male headers, this lets you plug in the Feather into a solderless breadboard
{{asm-row|img=FEATHER-M0-Assembler-10.jpg}}
{{asm-img|FEATHER-M0-Assembler-11.jpg}}
{{asm-text}} Another option is to go with socket female headers. This won't let you plug the Feather into a breadboard but it will let you attach featherwings very easily
{{asm-row|img=FEATHER-M0-Assembler-20.jpg}}
{{asm-img|FEATHER-M0-Assembler-21.jpg}}
{{asm-text}} We also have 'slim' versions of the female headers, that are a little shorter and give a more compact shape
{{asm-row|img=FEATHER-M0-Assembler-30.jpg}}
{{asm-img|FEATHER-M0-Assembler-31.jpg}}
{{asm-text}} Finally, there's the "Stacking Header" option. This one is sort of the best-of-both-worlds. You get the ability to plug into a solderless breadboard and plug a featherwing on top. But its a little bulky
{{asm-end}}
== Souder un pinHeader ==
<small>Toutes les images ci-dessous sont créditées à [http://www.adafruit.com Adafruit Industries] - Credit to [http://www.adafruit.com Adafruit Industries] for all the images here under</small>
{{asm-begin}}
{{asm-row|img=FEATHER-M0-Assembler-50.jpg}}
{{asm-text}} '''Prepare the header strip:'''
Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - '''long pins down'''
{{asm-row|img=FEATHER-M0-Assembler-51.jpg}}
{{asm-text}} '''Add the breakout board:'''
Place the breakout board over the pins so that the short pins poke through the breakout pads
'''And Solder!'''
Be sure to solder all pins for reliable electrical contact.
{{asm-row|img=FEATHER-M0-Assembler-52.jpg}}
{{asm-text}} Solder the other strip as well.
{{asm-row|img=FEATHER-M0-Assembler-52.jpg}}
{{asm-text}} You're done! Check your solder joints visually and continue onto the next steps
{{asm-end}}
== Souder un connecteur femelle ==
{{asm-begin}}
{{asm-row|img=FEATHER-M0-Assembler-60.jpg}}
{{asm-text}} xxx
{{asm-end}}
{{FEATHER-M0-TRAILER}}
{{FEATHER-M0-TRAILER}}