Modifications

  sudo raspi-config

  sudo raspi-config

Then pick the '''Enable Boot to Desktop/Scratch''' option and choose if you want to boot to the console, desktop, or scratch environment.  After exiting the tool and rebooting you should see the Pi load X windows on the PiTFT after (be patient it can take around 30 seconds to load).Obviously if you have a touchscreen, it cannot tell what finger you are pressing with. This means that all 'clicks' are left clicks. But if you want a right-click, you can do it.

Then pick the '''Enable Boot to Desktop/Scratch''' option and choose if you want to boot to the console, desktop, or scratch environment.  After exiting the tool and rebooting you should see the Pi load X windows on the PiTFT after (be patient it can take around 30 seconds to load).

 

If you want to disable booting to X, just use the raspi-config command again to choose the console boot option.t clicks. But if you want a right-click, you can do it.

Just add the following lines into your InputClass of {{fname|/etc/X11/xorg.conf.d/99-calibration.conf}} after the calibration section

Just add the following lines into your InputClass of {{fname|/etc/X11/xorg.conf.d/99-calibration.conf}} after the calibration section