29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 33 :
Ligne 33 : − − == Exécuter le croquis == − {{traduction}} − Once you upload the sketch to your board (via the arrow-shaped upload icon), and the upload process has finished, open up the Serial Monitor via '''Tools > Serial Monitor''', and make sure that the baud rate in the lower right-hand corner is set to '''115200''': − − {{ADFImage|Bluefruit-LE-Shield-HIDKeyboard-10.png}} − − To send keyboard data, type anything into the textbox at the top of the Serial Monitor and click the Send button.
Bluefruit-LE-Shield-HIDKeyboard (voir la source)
Version du 21 mai 2017 à 19:14
, 21 mai 2017 à 19:14→Exécuter le croquis
* This tutorial does not need to use the MODE pin, '''make sure you have the mode switch in CMD mode''' if you do not configure & connect a MODE pin
* This tutorial does not need to use the MODE pin, '''make sure you have the mode switch in CMD mode''' if you do not configure & connect a MODE pin
* Don't forget to also '''connect the CTS pin on the Bluefruit to ground if you are not using it!''' (The Flora has this already done)
* Don't forget to also '''connect the CTS pin on the Bluefruit to ground if you are not using it!''' (The Flora has this already done)
== Lier le clavier HID ==
== Lier le clavier HID ==