Modifications

{{asm-img|img=Rasp-PiGRRL-2-Montage2-29.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Montage2-29.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Montage2-30.jpg}}

{{asm-img|img=Rasp-PiGRRL-2-Montage2-30.jpg}}

{{asm-text}}

{{asm-text}} {{traduction}}

Next up, lets mount the Pi to the bottom case. First, let's fasten #4-40 3/8 sized machine screws to the two mount holes on the back of the bottom case part. Like the previous mounting standoffs, fasten the screws so they're just barely protuding through the top of the standoffs. Then, lay the Pi over the standoffs and line up the screws with the mounting holes. Once in place, fasten the screws all the way until they're flush with the surface of the case.

Next up, lets mount the Pi to the bottom case. First, let's fasten #4-40 3/8 sized machine screws to the two mount holes on the back of the bottom case part. Like the previous mounting standoffs, fasten the screws so they're just barely protuding through the top of the standoffs. Then, lay the Pi over the standoffs and line up the screws with the mounting holes. Once in place, fasten the screws all the way until they're flush with the surface of the case.