29 837
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 145 :
Ligne 145 : − + − + − Built in 100mA lipoly charger with charging status indicator LED+ − Pin #13 red LED for general purpose blinking+ − Power/enable pin+ − 4 mounting holes −
ENG-CANSAT-CONTENT (voir la source)
Version du 20 septembre 2018 à 19:49
, 20 septembre 2018 à 19:49→Feather M0 Express in details
* No EEPROM
* No EEPROM
* RTC & Clock based on 32.768 KHz crystal
* RTC & Clock based on 32.768 KHz crystal
* 3.3V regulator (500mA peak current)
* 3.3V regulator (500mA peak current) with Power/enable pin
* USB native support (has USB bootloader)
* USB native support (has USB bootloader)
* 20 GPIO pins (PWM on all pins)
* 20 GPIO pins (PWM on all pins)
* Hardware Serial + Hardware I2C + Hardware SPI support
* Hardware Serial + Hardware I2C + Hardware SPI support
* 6 x 12-bit analog inputs (from 0 to 4095)
* 6 x 12-bit analog inputs (from 0 to 4095)
1 x 10-bit analog ouput (DAC)
* 1 x DAC 10-bit analog ouput (from 0 to 1024)
* Lipo Charger included: 100mA charging with status LED
* Red LED attached on pin #13 (like Arduino UNO)
* Reset button
Reset button
{{ENG-CANSAT-TRAILER}}
{{ENG-CANSAT-TRAILER}}