Modifications

== Wiring ==

== Wiring ==

To use the TMP36, connect the pin 1 (on the left) to a power source (3.3V), the pin 3 (the the right droite) to the ground. Finally, the pin 2 (middle one) is the analogue output to wire on the microcontroler.

To use the TMP36, connect:

* The pin 1 (on the left) to a power source (3.3V),  

* The pin 3 (the the right droite) to the ground/GND.  

* The pin 2 (middle one) to the A3 analogue input.

The output voltage would range from 0V @ -50°C to 1.75V @ 125°C. So no risk for our 3V based microcontroler.

[[Fichier:ENG-CANSAT-TMP36-01.png|480px]]

[[Fichier:ENG-CANSAT-TMP36-01.png|480px]]

The TMP36 output voltage would range from 0V @ -50°C to 1.75V @ 125°C. So no risk for our 3V based microcontroler.

 

{{ENG-CANSAT-TRAILER}}

{{ENG-CANSAT-TRAILER}}