{{ambox|text=If you add trouble to flash the Feather, you can still activate manually the '''boot mode''' by double pressing the reset button before compiling the sketch.}}
{{ambox|text=If you add trouble to flash the Feather, you can still activate manually the '''boot mode''' by double pressing the reset button before compiling the sketch.}}
+
+
=== Running ===
+
Now open the Serial Monitor and set the baud rate to 115200 baud.
+
+
As there is no board listening and answering, you should see the following result on the screen.
+
+
[[Fichier:ENG-CANSAT-RFM69HCW-TEST-25.png]]
+
+
Later, when the the receiver would be ready, the message will turn to: