29 910
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 40 :
Ligne 40 : − + − + − + − + + + + + + + + + + + + + + + + + + + + + + + + + Ligne 49 :
Ligne 73 : − + Ligne 72 :
Ligne 96 : − + − + − + − + − + − + − + − + − + − + − + − + Ligne 97 :
Ligne 121 : − + − +
ENG-CANSAT-PICO-CONTENT (voir la source)
Version du 23 octobre 2021 à 01:38
, 23 octobre 2021 à 01:38→Kit content
{{parts-item
{{parts-item
|name=Feather M0 Express
|name=Raspberry-Pi Pico
|descr=New Arduino M0 compatible on a standard platform for embedded project. Also compatible with CircuitPython.
|descr=Dual core RP2040 MCU @ 133 MHz with 264Ko RAM & 2 Mo Flash. One Pico is used on the Cansat kit, the other is used for prototyping.
|img=FEATHER-M0-EXPRESS.png
|img=RASPBERRY-PICO.png
|link=https://shop.mchobby.be/product.php?id_product=1119
|link=https://shop.mchobby.be/product.php?id_product=2025
|qty=2
}}
{{parts-item
|name=Cansat base dev. board for Pico
|descr=Solder a Pico onto it and drive your cansat project with MicroPython.
|img=PICO-CANSAT-BASE.png
|link=https://shop.mchobby.be/product.php?id_product=2275
|qty=1
}}
{{parts-item
|name=Cansat proto board
|descr=Prototyping board connected to the Pico GPIO.
|img=PICO-CANSAT-PROTO.png
|link=https://shop.mchobby.be/product.php?id_product=2272
|qty=1
}}
{{parts-item
|name=FPC ribbon
|descr=This ribbon connects the base board to the proto board.
|img=FPC-RUBAN-100mm.png
|link=https://shop.mchobby.be/product.php?id_product=2278
|qty=1
|qty=1
}}
}}
{{parts-item
{{parts-item
|name=USB A/microB 1m cable
|name=USB A/microB 1m cable
|descr=Can be used to plug your feather on a computer to program it or to reload the Lipo.
|descr=Can be used to plug your pico on a computer to program it or to reload the Lipo.
|img=CABLE-USB-MICRO.png
|img=CABLE-USB-MICRO.png
|link=https://shop.mchobby.be/product.php?id_product=145
|link=https://shop.mchobby.be/product.php?id_product=145
{{parts-item
{{parts-item
|name=Feather Stacking Headers
|name=PowerBoost 500 charger
|descr=Plug your feather or prototype wing on breadboard and still having a female connector under the hand.
|descr=Convert a Lipo battery power into usable 5V power source. This board can also reload the Lipo when the kit is powered via USB.
|img=FEATHER-STACK-HEAD.png
|img=POWERBOOST-500-CHARGER.png
|link=https://shop.mchobby.be/product.php?id_product=832
|link=https://shop.mchobby.be/product.php?id_product=534
|qty=1
|qty=1
}}
}}
{{parts-item
{{parts-item
|name=Feather Prototyping Wing
|name=Lithium Polymer Battery
|descr=Prototyping board for feather platform. Create your own extension board (wing) by soldering connectors and components.
|descr=Transform the Feather into an autonomous plateform with this 1300mAh Lipo.
|img=FEATHER-PROTO-WING.png
|img=ACC-LIPO-1.3Ah.png
|link=https://shop.mchobby.be/product.php?id_product=861
|link=https://shop.mchobby.be/product.php?id_product=277
|qty=1
|qty=1
}}
}}
{{parts-item
{{parts-item
|name=Lithium Polymer Battery
|name=JST-SH fast connexion wire
|descr=Transform the Feather into an autonomous plateform with this 800mAh Lipo.
|descr=This 100mm wire can be used to connect Qwiic or StemmaQt board to the Pico in a snap
|img=ACC-LIPO-800mAh.png
|img=FIL-JSTSH4-100mm.png
|link=https://shop.mchobby.be/product.php?id_product=1302
|link=https://shop.mchobby.be/product.php?id_product=2112
|qty=1
|qty=1
}}
}}
{{parts-item
{{parts-item
|name=BMP280 – Barometric pressure sensor
|name=BMP280 – Barometric pressure sensor
|descr=Easily evaluate pressure, altitude and temperature.
|descr=Easily evaluate pressure, altitude and temperature. This board expose a StemmaQt connector
|img=BMP280.jpg
|img=BMP280v2.jpg
|link=https://shop.mchobby.be/product.php?id_product=1118
|link=https://shop.mchobby.be/product.php?id_product=1118
|qty=1
|qty=1