Ligne 117 : |
Ligne 117 : |
| * '''3V3_EN''' - | | * '''3V3_EN''' - |
| * '''GND''' - | | * '''GND''' - |
| + | |
| + | === Digital Pins === |
| + | xxx |
| | | |
| === Analog Pins === | | === Analog Pins === |
Ligne 125 : |
Ligne 128 : |
| * '''GP26''' - ADC0 | | * '''GP26''' - ADC0 |
| * '''GP26''' - VSYS/3 | | * '''GP26''' - VSYS/3 |
| + | * '''AGND''' - |
| + | * '''ADC_VREF''' - 3.3V filtered, do not applies any voltage to that pin. |
| + | |
| + | === UARTs === |
| + | xxx |
| + | |
| + | REPL on UART(0) |
| + | |
| + | === Other Pins === |
| + | xxx |
| + | |
| + | * '''RUN''' - xxx. Act like '''Reset''' pin. |
| + | * '''3V3_EN''' - Already mentionned. Deactivate the 3.3V power regulator when tied to the ground. |
| + | * '''GP23''' - PowerSave internal board pin. Depending on the conditions, this pin can reduce the power consumption of the board. |
| + | * '''GP24''' - Altready mentionned. This internal board pin is High when the board is connected to a computer or wall adapter (when VBus = 5V). |
| | | |
| === Debug Pins === | | === Debug Pins === |