Modifications
Sauter à la navigation
Sauter à la recherche
← Modification précédente
Modification suivante →
ENG-CANSAT-PICO-MISSION1-CAPTURE
(voir la source)
Version du 6 mars 2022 à 01:29
7 octets ajoutés
,
6 mars 2022 à 01:29
→Wire the temperature sensor
Ligne 72 :
Ligne 72 :
* The pin 1 (on the left) to a power source (3.3V),
* The pin 1 (on the left) to a power source (3.3V),
* The pin 3 (the the right) to the ground/GND.
* The pin 3 (the the right) to the ground/GND.
−
* The pin 2 (middle one) to the ADC0 analog input.
+
* The pin 2 (middle one) to the ADC0
(GP26)
analog input.
The Pico pad on the board are large enough to quickly solder the TMP36 on the board. The TMP36 can also bee soldered under the board.
The Pico pad on the board are large enough to quickly solder the TMP36 on the board. The TMP36 can also bee soldered under the board.
Admin
Bureaucrates
,
Administrateurs
29 917
modifications
Menu de navigation
Outils personnels
Se connecter
Espaces de noms
Page
Discussion
Variantes
Affichages
Lire
Voir le texte source
Voir l’historique
Plus
Rechercher
Navigation
ARDUINO
RASPBERRY-PI
[:: PI Hacking ::]
Particle.IO
Micro Python
Imprimante 3D
Actualités
Modifications récentes
Page au hasard
Aide
Outils
Pages spéciales
Version imprimable