Modifications

{{asm-text}} Flip the board again (to see the "PowerBoost" text).

{{asm-text}} Flip the board again (to see the "PowerBoost" text).

Slides the PowerBoost 1000 breakout on the connector and Solder the pins (except the 2 missing ones).

Slides the PowerBoost 1000 Charger breakout on the connector and Solder the pins (except the 2 missing ones).

'''WARNING: back of the breakout board MUST be visible (not the components)!'''

'''WARNING: back of the breakout board MUST be visible (not the components)!'''

{{underline|Tip:}}  

{{underline|Tip:}}  

{{traduction}}

{{traduction}}

* Push on the PowerBoost breakout with the nail against the connector.<br />This will flatten the breakout on the connector (and make it paralleled to the base board).

* Maintain the PowerBoost breakout with your fingers on the top part of the connector.<br />This way, the breakout stays paralleled to the base board.

* Charge the tip of the iron with some solder.

* Charge the tip of the iron with some solder.

* Tack a drop of solder a pin to make the breakout staying right in place (no need to be perfect right now)

* Tack a drop of solder on one pin to make the breakout staying right in place (no need to be perfect right now)

* Solder the other pins of the breakout

* Solder the other pins of the breakout

* Now solder the initial tacked pin (to have a nice & great solder join on that pin too)   

* Now solder the initial tacked pin (to have a nice & great solder join on that pin too)