29 836
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 44 :
Ligne 44 : − − == Installer les pilotes == Ligne 86 :
Ligne 84 : + + + + + + + + + + + + + + + + + +
Arduino Robot-Guide démarrage (voir la source)
Version du 14 septembre 2013 à 10:15
, 14 septembre 2013 à 10:15aucun résumé de modification
If the LEDs on either board do not turn on, check if the flat 10-pin communication cable next to the power switch is connected to both boards.
If the LEDs on either board do not turn on, check if the flat 10-pin communication cable next to the power switch is connected to both boards.
== Installer les pilotes ==
== Installer les pilotes ==
Il n'est pas nécessaire d'installer des pilotes pour Ubuntu 12.04.
Il n'est pas nécessaire d'installer des pilotes pour Ubuntu 12.04.
== Hello User! (Bonjour Utilisateur!) ==
The Arduino Robot comes with a preloaded application that will ask for your name, what you want to name the robot, and where you are located. Look at the screen on the robot for information on how to input your information using the buttons and potentiometer.
You can power the robot by with 4 AAA batteries, or connect a USB cable to either the motor or control board.
{{ARDImage|RB-ARD-ROBOT-70.png|480px}}
Once you have gone through the setup process with the robot, you can start writing your own programs to control it.
== Le croquis de test ==
To program the robot, connect the '''Control Board''' to your computer via USB. Open the Arduino IDE, and load the sketch located in File > Examples > Robot_Control > learn > MotorTest.
You need to tell the IDE which Arduino board you are targeting with your software, so open the '''Tools > Board''' menu and choose '''Arduino Robot Control'''.
The Arduino IDE must know which of your USB ports the robot is connected to. The '''Tools > Serial''' menu lists the available ports.
* if only one item is shown, click on that one.
* if two or more are shown, you can disconnect the Control Board and re-open the menu; the entry that disappears should be the robot. Reconnect the board and select that serial port.
{{Arduino-Robot-TRAILER}}
{{Arduino-Robot-TRAILER}}