Modifications

Le bouton SETUP à 4 autres fonctions {{underline|avant le redémarrage/Reboot}} du Photon:

Le bouton SETUP à 4 autres fonctions {{underline|avant le redémarrage/Reboot}} du Photon:

* Hold down the SETUP button, tap on the RESET button and wait for '''less than 3 seconds''' to enter '''User Safe Mode''' mode, where the RGB LED will be flashing Magenta. Release the SETUP button. This is the most frequently mode, because your user application will not execute. This can be useful if you have a bug in your code that is keeping you from re-flashing it over the air, or causing other hanging issues.

* Maintenez le bouton SETUP enfoncé, pressez brièvement sur le bouton RESET et attendez '''moins de 3 secondes''' pour entrer dans le mode '''User Safe Mode''' (mode où la led RGB clignote en magenta). Relâchez le bouton SETUP. C'est le mode le plus fréquent, parce qu'il n'exécute pas votre application. Cela peut être utile lorsque vous avez un Bug dans votre application qui empêche de re-flasher le Photon via la connexion WiFi (''over the air'') ou causant d'autres plantages.

* Hold down the SETUP button, tap on the RESET button and wait for '''3-6 seconds''' to enter '''Bootloader''' mode, where the RGB LED will be flashing Yellow. Release the SETUP button. In this mode you can reprogram the Photon over USB or JTAG. If you do this by accident, simply hit RESET button to leave Bootloader mode.

* Maintenez le bouton SETUP enfoncé, pressez brièvement sur le bouton RESET et attendez '''de 3 à 6 secondes''' pour entrer en mode '''Bootloader''' (mode où la LED RGB clignote en jaune). Relâchez le bouton SETUP button. Dans ce mode, vous pouvez reprogrammer le Photon via USB ou JTAG. Si vous entrez dans ce mode par accident, pressez simplement sur lebuton RESET pour quitter le mode Bootloader.

* Hold down the SETUP button, tap on the RESET button and wait for '''6-10 seconds''' to enter '''Factory Reset Safe Mode''' mode, where the RGB LED will be flashing Green. Release the SETUP button. In this mode the Photon is reprogrammed with the software that was installed on the Photon in the factory (the Tinker application). The LED should turn white for three seconds and begin flashing quickly; when the LED switches to another color the Photon has been reset. This is useful if you encounter bugs with your firmware, or if you just want to get back to Tinker. Wi-Fi credentials are not erased in this mode.

* Maintenez le bouton SETUP enfoncé, pressez brièvement sur le bouton RESET et attendez '''de 6 à 10 secondes''' pour entrer dans le mode '''Factory Reset Safe Mode''' (reset d'unsine sécurisé), où la LED RGB clignote en vert. Relâcher le bouton SETUP. Dans ce mode, le Photon est reprogrammé avec le logiciel qui à été installé en usine au moment de sa fabrication (l'application Tinker). La LED devrait passer au blanc pendant 3 secondes et commencer à clignoter rapidement; Le Photon est réinitialisé lorsque la LED passe à une autre couleur. Ce mode est pratique lorsque vous rencontrer des bogues avec le FirmWare ou si vous voulez simplement revenir à l'application Tinker. Les certificats Wi-Fi ne sont pas effacé lorsque ce mode est activé.

*Hold down the SETUP button, tap once on the RESET button and wait for '''10 seconds+''' to do a '''Factory Reset''', where the RGB LED will be flashing White. Release the SETUP button. In this mode the Photon is reprogrammed with the software that was installed on the Photon in the factory (the Tinker application). The LED should turn white for three seconds and begin flashing quickly; when the LED switches to another color the Photon has been reset. This is useful if you encounter bugs with your firmware, or if you just want to get back to Tinker. Wi-Fi credentials are also erased in this mode, so you'll have to set those up again.

* Maintenez le bouton SETUP enfoncé, pressez brièvement sur le bouton RESET et attendez '''plus de 10 secondes''' to do a '''Factory Reset''', where the RGB LED will be flashing White. Release the SETUP button. In this mode the Photon is reprogrammed with the software that was installed on the Photon in the factory (the Tinker application). The LED should turn white for three seconds and begin flashing quickly; when the LED switches to another color the Photon has been reset. This is useful if you encounter bugs with your firmware, or if you just want to get back to Tinker. Wi-Fi credentials are also erased in this mode, so you'll have to set those up again.

== Les LEDs ==

== Les LEDs ==