Modifications

== Les tests ==

== Les tests ==

{{bloc-etroit|text=Ensure you have made all the connections noted in the Fritzing diagram on the Overview page.

{{bloc-etroit|text=Assurez-vous d'avoir réalisé toutes les connexions comme indiqué sur le diagramme de la page d'introduction.

Program the Trinket out of the circuit, then place in the headers on the circuit board. I recommend using headers over soldering directly in due to the connections to Pin 3.

Programmez le Trinket sans qu'il soit branché sur le circuit. Branchez le ensuite sur les connecteurs de la carte. Il est prévérable d'utiliser des connecteurs plutôt que de souder directement le Trinket sur la carte (à cause de la connexion de la broche 3).

Power up the circuit. The battery should probably charge with the CHRG light lit on the LiPo charger circuit board. The Trinket green LED should be lit. If not, unplug and check your connections.

Mettez le circuit sous tension. L'accu LiPo sera certainement en cours de chargement (ce que vous pouvez constater avec la LED "''CHRG''" allumée sur la carte du chargeur LiPo. La LED Verte du Trinket devrait être allumée. Si ce n'est pas le cas, mettez hors tension et vérifiez vos connections.

When working right, the red LED on Trinket is probably blinking showing the sensors that are tripped - this is normal as the PIR sensor probably sees you moving and you might not have the magnets against the mag sensors. Place the magnets next to the mag sensors and aim the PIR away from you. The system should "set up" (no blinking). Then when you move in front of the sensor it should blink once a second or so with more blinks depending on which sensors tripped as follows:}}

When working right, the red LED on Trinket is probably blinking showing the sensors that are tripped - this is normal as the PIR sensor probably sees you moving and you might not have the magnets against the mag sensors. Place the magnets next to the mag sensors and aim the PIR away from you. The system should "set up" (no blinking). Then when you move in front of the sensor it should blink once a second or so with more blinks depending on which sensors tripped as follows:}}