29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 25 :
Ligne 25 : − If the PIR is not indicating correctly, move the orange potentiometers to reduce or increase sensitivity. If it will not "go off", reduce the latch time.+ − The system state is also broadcast via serial to an Adafruit Bluefruit EZ-Link at 9600 baud. It transmits up to 10 meters (33 feet).+ + +
→Les tests
* 7 clignotements - Tous les senseurs sont activés
* 7 clignotements - Tous les senseurs sont activés
Si le senseur PIR ne réagit pas assez vite, ajustez le potentiomètre orange pour réduire ou augmenter la sensibilité. Si le senseur PIR s'active mais ne se désactive pas assez vite alors vous devez ajuster le temps d'activation (le ''latch time'').
L'état du système d'alarme est également diffusé via le port série vers un Adafruit Bluefruit EZ-Link (avec un débit de 9600 bauds). Le BlueFruit transmet donc l'information jusqu'à une distance de 10 mètres.
{{traduction}}
With a laptop/PC with a Bluetooth Receiver, determine which serial port is connected to Bluetooth for your operating system (for Windows, go to Control Panel, Devices and Printers - if you do not see Adafruit Bluefruit listed, use the Bluetooth program in the systems tray (lower right, tiny B icon) to add it to your Bluetooth device list. You may have to press the pair button on the Bluefruit board to have it recognized.
With a laptop/PC with a Bluetooth Receiver, determine which serial port is connected to Bluetooth for your operating system (for Windows, go to Control Panel, Devices and Printers - if you do not see Adafruit Bluefruit listed, use the Bluetooth program in the systems tray (lower right, tiny B icon) to add it to your Bluetooth device list. You may have to press the pair button on the Bluefruit board to have it recognized.