29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 22 :
Ligne 22 : − + − +
UniPi-sortie-analogique (voir la source)
Version du 23 juillet 2017 à 12:18
, 23 juillet 2017 à 12:18→Exemple
* Un signal PWM à 100% produit une tension de 10V.
* Un signal PWM à 100% produit une tension de 10V.
[[Fichier:UniPi-sortie-analogique-00.jpg]]
[[Fichier:UniPi-sortie-analogique-00.png]]
Below, see viring example of UniPi regulating its own 12V and measuring it using its Analog Input.
Below, see viring example of UniPi regulating its own 12V and measuring it using its Analog Input.
[[Fichier:UniPi-sortie-analogique-00.jpg]]
[[Fichier:UniPi-sortie-analogique-00.png]]
The 12V line is connected to the AOV. AI1- is the UniPi GND so it is connected to the AOG. AOV is the connector providing the Analog Output positive voltage which is connected to the AI1+. This way, you will see the your analog output directly on your analog input.
The 12V line is connected to the AOV. AI1- is the UniPi GND so it is connected to the AOG. AOV is the connector providing the Analog Output positive voltage which is connected to the AI1+. This way, you will see the your analog output directly on your analog input.
{{UniPi-TRAILER}}
{{UniPi-TRAILER}}