29 922
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 28 :
Ligne 28 : − + − + − + − + − + − + − + − + − + − + − + − + − +
→References
== References ==
== References ==
Les commandes Arduino suivantes devraient être supportée:
Les commandes Arduino suivantes devraient être supportées:
* pinMode()
* [http://arduino.cc/en/Reference/PinMode pinMode()]
* digitalWrite()
* [http://arduino.cc/en/Reference/DigitalWrite digitalWrite()]
* digitalRead()
* [http://arduino.cc/en/Reference/DigitalRead digitalRead()]
* analogRead()
* [http://arduino.cc/en/Reference/AnalogRead analogRead()]
* analogWrite()
* [http://arduino.cc/en/Reference/AnalogWrite analogWrite()]
* shiftOut()
* [http://arduino.cc/en/Reference/ShiftOut shiftOut()]
* pulseIn()
* [http://arduino.cc/en/Reference/PulseIn pulseIn()]
* millis()
* [http://arduino.cc/en/Reference/Millis millis()]
* micros()
* [http://arduino.cc/en/Reference/Micros micros()]
* delay()
* [http://arduino.cc/en/Reference/Delay delay()]
* delayMicroseconds()
* [http://arduino.cc/en/Reference/DelayMicroseconds delayMicroseconds()]
* SoftwareSerial (mis-à-jour dans Arduino 1.0)
* [http://arduino.cc/en/Reference/SoftwareSerial SoftwareSerial] (mis-à-jour dans Arduino 1.0)
{{Arduino-ATTiny-85-TRAILER}}
{{Arduino-ATTiny-85-TRAILER}}