ADAFRUIT-AUDIO-FX-Alimentation
En cours de traduction/élaboration. |
Alimenter la carte son
You won't be able to play audio while the board is connected to USB, so to actually trigger audio you'll need to unplug the USB cable and power it another way. There's many ways to power the Sound Board, you'll have to go with whatever it easiest for you.
Utiliser un PowerBank
Utiliser un PowerBank est la façon la plus simple d'alimenter un Audio FX et ne nécessite aucune soudure! Connectez simplement le connecteur microUSB sur le PowerBank USB. Etant donné qu'il n'y a pas de ligne de données sur un PowerBank, la carte Audio FX n'essayera pas de comporter comme une clé USB. Connectez simplement n'importe quel câble microUSB. Ces powerbank contiennent beaucoup d'énergie, ce qui permettra d'alimenter la carte son + amplificateur pendant vraiment longtemps
Crédit: AdaFruit Industries www.adafruit.com
Alimentation avec amplificateur
The 2x2W amplifier version of the Sound Board is a pretty beefy 2x2W amplifier. If you are using 2 x 4 ohm speakers, that means you could be seeing as much as 2 Amp spikes of current. (In reality, assume spikes of 1A since audio isn't a DC load). Power with good charged batteries like AA's or even AAA's. For lipoly batteries, a 500mAh battery is minimal! Go for 1200mAh or more if you plan on playing it loud
Alimentation via VIn
You can use a AA or AAA battery pack and wire it up directly to the Vin an GND pins. We recommend 3xAA or 3xAAA alkaline or rechargeable as ideal. You can use 4xAA or 4xAAA but in that case, make sure you've got rechargeable batteries, as the higher voltage alkalines may be a bit much for the board.
Toutes les images ci-dessous proviennent d'Adafruit - Credit to Adafruit Industries for all images here under
Utiliser un connecteur JST
If you don't want to solder wires directly, you can solder on a connecteur JST PH 2-broches connector to the back. We don't include this on the board because its a bit bulky and if the JST is in place you can snap a battery in or out easily. The connector is the same as the Vin/GND pins on the side so use one or the other!
Crédit: AdaFruit Industries www.adafruit.com
Tous nos accu Lipoly sont livrés avec un connecteur JST, notre Bloc pile 3xAAA avec bouton on/off convient également.
Ou vous pouvez également utiliser notre câble JST PH pour y brancher votre piles.
Utiliser un Backpack
We designed a backpack Lipoly pour Trinket Pro but you can also use it with the Sound Board! Use the extra long header included to solder it over the USB jack, it connects to Vin, GND and BUS
Crédit: AdaFruit Industries www.adafruit.com
The Lipoly backpack lets you plug in a lipoly battery of any size and recharge it over the MicroUSB connector, so it's basically an all-in-one portable + rechargable system.
Avec le backpack, vous pouvez facilement ajouter un interrupteur on/off.
Source: Adafruit Audio FX Sound board Crédit: AdaFruit Industries
Créé par Ladyada pour AdaFruit Industries.
Traduit par Meurisse D. pour MCHobby.
Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : « Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.
L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.
Traduit avec l'autorisation d'AdaFruit Industries - Translated with the permission from Adafruit Industries - www.adafruit.com