Modifications

If you're using an Arduino compatible such as a Mini or Boarduino (or any of the other hundreds of Arduino-compat's), chances are it has an FTDI connector on it. You can plug the EZ-Link directly in, the '''GND''' pin lines up with the '''Black''' wire, and the '''DTR''' pin lines up with the '''Green''' wire. No other components are required

If you're using an Arduino compatible such as a Mini or Boarduino (or any of the other hundreds of Arduino-compat's), chances are it has an FTDI connector on it. You can plug the EZ-Link directly in, the '''GND''' pin lines up with the '''Black''' wire, and the '''DTR''' pin lines up with the '''Green''' wire. No other components are required

{{ADImage|EZ-LINK-Programmer-Arduino-11.jpg}}

{{ADFImage|EZ-LINK-Programmer-Arduino-11.jpg}}

== Upload ==

== Upload ==