Ligne 11 : |
Ligne 11 : |
| <syntaxhighlight lang="python"> | | <syntaxhighlight lang="python"> |
| | | |
− | # Uncomment some or all of these to enable the optional hardware interfaces | + | # Uncomment some or all of these to enable the optional hardware interfaces ->> Retirer le # au début des lignes nécessaires pour que le système les prenne en compte |
| # Params: | | # Params: |
− | # i2c_arm Set to "on" to enable the ARM's i2c interface | + | # i2c_arm Set to "on" to enable the ARM's i2c interface ->> Activer ou non le bus i2c du Raspberry Pi |
| # (default "off") | | # (default "off") |
− | # i2c_vc Set to "on" to enable the i2c interface | + | # i2c_vc Set to "on" to enable the i2c interface |
| # usually reserved for the VideoCore processor | | # usually reserved for the VideoCore processor |
| # (default "off") | | # (default "off") |
− | # i2c_arm_baudrate Set the baudrate of the ARM's i2c interface | + | # i2c_arm_baudrate Set the baudrate of the ARM's i2c interface ->> Vitesse de transmission (débit) du bus i2c ARM |
| # (default "100000") | | # (default "100000") |
− | # i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface | + | # i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface ->> Vitesse du bus i2c pour le Core Video |
| # (default "100000") | | # (default "100000") |
− | # i2c_baudrate An alias for i2c_arm_baudrate | + | # i2c_baudrate An alias for i2c_arm_baudrate ->> Un alias pour la vitesse de transmission ARM i2c |
− | # i2s Set to "on" to enable the i2s interface | + | # i2s Set to "on" to enable the i2s interface ->> Paramétrer à "on" pour activer l'interface i2s |
| # (default "off") | | # (default "off") |
− | # spi Set to "on" to enable the spi interfaces | + | # spi Set to "on" to enable the spi interfaces ->> Paramétrer à "on" pour activer l'interface spi |
| # (default "off") | | # (default "off") |
− | # act_led_trigger Choose which activity the LED tracks. | + | # act_led_trigger Choose which activity the LED tracks. ->> Changer le feedback offert par la LED (par exemple "heartbeat" fera clignoter la LED au rythme des battements cardiaques) |
| # Use "heartbeat" for a nice load indicator. | | # Use "heartbeat" for a nice load indicator. |
| # (default "mmc") | | # (default "mmc") |
− | # act_led_activelow Set to "on" to invert the sense of the LED | + | # act_led_activelow Set to "on" to invert the sense of the LED ->> En paramétrant sur "on", cela inversera le feedback de la LED |
| # (default "off") | | # (default "off") |
− | # act_led_gpio Set which GPIO pin to use for the activity LED | + | # act_led_gpio Set which GPIO pin to use for the activity LED ->> Activer la LED d'activité du port GPIO ("16" pour un Pi non plus, "47" pour les Plus, Pi2 et Pi3) |
| # (in case you want to connect it to an external | | # (in case you want to connect it to an external |
| # device) | | # device) |
Ligne 139 : |
Ligne 139 : |
| | | |
| </syntaxhighlight> | | </syntaxhighlight> |
− |
| |
− |
| |
| | | |
| = Premier lancement = | | = Premier lancement = |