Modifications

== Utiliser un connecteur JST ==

== Utiliser un connecteur JST ==

If you don't want to solder wires directly, you can solder on a ***link***{{pl|537|connecteur JST PH 2-broche}} connector to the back. We don't include this on the board because its a bit bulky and if the JST is in place you can snap a battery in or out easily. The connector is the same as the Vin/GND pins on the side so use one or the other!

If you don't want to solder wires directly, you can solder on a {{pl|537|connecteur JST PH 2-broches}} connector to the back. We don't include this on the board because its a bit bulky and if the JST is in place you can snap a battery in or out easily. The connector is the same as the Vin/GND pins on the side so use one or the other!

{{ADFImage|ADAFRUIT-AUDIO-FX-Alimentation-20.jpg|640px}}

{{ADFImage|ADAFRUIT-AUDIO-FX-Alimentation-20.jpg|640px}}

All our ***LINK***  Lipoly batteries come with a JST, and our ***LINK***  3xAAA on/off pack also does.

Tous nos {{cl|83|accu Lipoly}} sont livrés avec un connecteur JST, notre {{pl|280|Bloc pile 3xAAA avec bouton on/off}} convient également.

Or, ***LINK*** connect your custom battery with a JST cable

Ou vous pouvez également utiliser notre {{pl|282|câble JST PH}} pour y brancher votre piles.

{{asm-begin}}

{{asm-begin}}