Modifications

== Les breakouts (en bas) ==

== Les breakouts (en bas) ==

The most important pins are broken out at the bottom of the board. Not all of these are required, but they are all hella useful

Les broches les plus importantes sont disponibles sur le bas de la carte. Ells ne sont pas toutes nécessaires mais elles sont toutes vraiment utiles.

These are in rough order of most important (not in linear order like we usually do)

Ces broches sont principalement ordonnées en fonction de leur importance (pas dans un ordre linéaire comme c'est d'abitude le cas).

These pins are all 3-5V input safe and if they are an output, the logic level is whatever Vio is set to.

Ces broches sont toutes des entrées supportant 3-5 volts (dit "3-5v safe") et si elles sont utilisées en sortie le niveau logique est adapté à la tension présente sur la broche Vio.

   

   

* '''Vio''' - '''{{underline|THIS IS THE MOST IMPORTANT PIN}}'''! This is the pin that you MUST drive with an external voltage from 3V-5V to set the logic level converter. The converter '''also buffers the indicator LEDs''' so NOTHING will appear to work unless this pin is powered! You should set the voltage to whatever voltage your microcontroller uses for logic. A 5V micro (like Arduino) should have it be 5V, a 3V logic micro should set it to 3V.

* '''Vio''' - '''{{underline|THIS IS THE MOST IMPORTANT PIN}}'''! This is the pin that you MUST drive with an external voltage from 3V-5V to set the logic level converter. The converter '''also buffers the indicator LEDs''' so NOTHING will appear to work unless this pin is powered! You should set the voltage to whatever voltage your microcontroller uses for logic. A 5V micro (like Arduino) should have it be 5V, a 3V logic micro should set it to 3V.