29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 124 :
Ligne 124 : + + + + + + + + + + + + + + + + +
ADF-BOARDUINO-SOUDER (voir la source)
Version du 20 novembre 2012 à 22:27
, 20 novembre 2012 à 22:27aucun résumé de modification
[[Fichier:Boarduino-Souder-34.jpg]]
[[Fichier:Boarduino-Souder-34.jpg]]
Solder the jumper header in place. You won't need to clip because the leads are short already!
[[Fichier:Boarduino-Souder-35.jpg]]
[[Fichier:Boarduino-Souder-35.jpg]]
[[Fichier:Boarduino-Souder-36.jpg]]
[[Fichier:Boarduino-Souder-36.jpg]]
Place the jumper/shunt as shown, so that its on the '''EXT''' pair of pins
[[Fichier:Boarduino-Souder-37.jpg]]
[[Fichier:Boarduino-Souder-37.jpg]]
Take the board out of the vise and plug in a power source such as a 9V DC positive-tip wall adapter or a 9V battery with a 2.1mm barrel jack. You should see the green LED light up.
If no LED lights up check:
Is the battery or wall adapter good?
Is it positive tip?
Is the diode in correctly?
Is the LED in correctly?
Are all the parts in place?
I don't suggest continuing if you can't get the green LED to light as it indicates a problem!
[[Fichier:Boarduino-Souder-38.jpg]]
[[Fichier:Boarduino-Souder-38.jpg]]
xxx
[[Fichier:Boarduino-Souder-39.jpg]]
[[Fichier:Boarduino-Souder-39.jpg]]