The emitter wiring (visible here before) is identical to the receiver wiring.
+
The emitter can be made 2 different ways (shown below).
−
Only the content of the script will change between the emitter and the receiver.
+
The wiring is, in facts, identical in the two options (and identical to receiver).
+
Only the script content will changes between the emitter and the receiver.
+
+
=== Option 1 : as the receiver ===
+
wiring (visible here before) is identical to the receiver wiring.
+
+
+
=== Option 2: with the Kit Cansat for Pico ===
{{pl|2271|Kit Cansat avec Raspberry-Pi Pico}} have a Raspberry-Pi Pico soldered onboard. The RFM69 module can be soldered on the UEXT connection points. UEXT can manage all the signals except the RST and SS).
{{pl|2271|Kit Cansat avec Raspberry-Pi Pico}} have a Raspberry-Pi Pico soldered onboard. The RFM69 module can be soldered on the UEXT connection points. UEXT can manage all the signals except the RST and SS).