Modifications

|}

|}

{{ambox|text=The Slave Select on the UEXT connector is not used in this setup because it is wired to PICO GP10. Indeed, we want the RFM69 code to be the same between the emitter and the receiver... so we do wire the RFM69 CS to GP5)}}

{{ambox|text=The "''Slave Select''" line on the UEXT connector is not used in this setup because it is wired to PICO GP10. As we want the RFM69 setup code to be the same between the emitter and the receiver... we do need to wire the RFM69's CS line to GP5.}}

{{traduction}}

{{traduction}}