FEATHER-M0-Assembler

Assemblage

We ship Feathers fully tested but without headers attached - this gives you the most flexibility on choosing how to use and configure your Feather

L'option pinHeader & connecteur

Before you go gung-ho on soldering, there's a few options to consider!

Toutes les images ci-dessous sont créditées à Adafruit Industries - Credit to Adafruit Industries for all the images here under

	The first option is soldering in plain male headers, this lets you plug in the Feather into a solderless breadboard
	Another option is to go with socket female headers. This won't let you plug the Feather into a breadboard but it will let you attach featherwings very easily
	We also have 'slim' versions of the female headers, that are a little shorter and give a more compact shape
	Finally, there's the "Stacking Header" option. This one is sort of the best-of-both-worlds. You get the ability to plug into a solderless breadboard and plug a featherwing on top. But its a little bulky

Souder un pinHeader

Toutes les images ci-dessous sont créditées à Adafruit Industries - Credit to Adafruit Industries for all the images here under

	Prepare the header strip: Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down
	Add the breakout board: Place the breakout board over the pins so that the short pins poke through the breakout pads And Solder! Be sure to solder all pins for reliable electrical contact.
	Solder the other strip as well.
	You're done! Check your solder joints visually and continue onto the next steps

Souder un connecteur femelle

	Tape In Place For sockets you'll want to tape them in place so when you flip over the board they don't fall out
	Flip & Tack Solder After flipping over, solder one or two points on each strip, to 'tack' the header in place
	And Solder!
	Be sure to solder all pins for reliable electrical contact. You're done! Check your solder joints visually and continue onto the next steps

---

Source: Adafruit Feather M0 Basic Proto créé par LadyAda pour AdaFruit Industries. Crédit [www.adafruit.com AdaFruit Industries]

Traduit par Meurisse D. pour MCHobby.be

Traduit avec l'autorisation d'AdaFruit Industries - Translated with the permission from Adafruit Industries - www.adafruit.com

Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : «  Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.

L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.