Modifications

</syntaxhighlight>

</syntaxhighlight>

== Réinitialiser la carte (Factory Reset) ==

== Réinitialiser la carte (Reset) ==

If something goes wrong, you can reset the board in two ways. The first is to press CTRL-D at the MicroPython prompt, which performs a soft reset. You will see a message something like:

Si quelque-chose ne se passe pas bien, il est possible de réinitialiser la carte (Reset) de deux façons différentes.

 

La première option est de presser CTRL-D sur l'invite de commande MicroPython. Cela effectue une réinitialisation logicielle (''soft reset''). C'est une façon très pratique de réinitialiser l'interpréteur Python de votre carte. Chez MCHobby

 

 

You will see a message something like:

<syntaxhighlight lang="python">

<syntaxhighlight lang="python">

</syntaxhighlight>

</syntaxhighlight>

If that isn’t working you can perform a hard reset (turn-it-off-and-on-again) by pressing the RST switch (the small black button next to the heartbeat LED). During telnet, this will end your session, disconnecting whatever program that you used to connect to the WiPy.

If that isn’t working you can perform a hard reset (turn-it-off-and-on-again) by pressing the RST switch (the small black button next to the heartbeat LED). During telnet, this will end your session, disconnecting whatever program that you used to connect to the WiPy.

{{WIPY-TRAILER}}

{{WIPY-TRAILER}}