Modifications

Sauter à la navigation Sauter à la recherche
933 octets ajoutés ,  16 mai 2017 à 20:08
Page créée avec « {{PiFace2-Manuel-NAV}} {{traduction}} This section will address the usage of multiples PiFace Digital 2 interfaces. More inputs and outputs can be provided by stacking m... »
{{PiFace2-Manuel-NAV}}
{{traduction}}

This section will address the usage of multiples PiFace Digital 2 interfaces.

More inputs and outputs can be provided by stacking multiple PiFaceTM Digital 2 boards using an appropriate connector (e.g. PiFaceTM Rack or PiFaceTM Shim).

To distinguish between interfaces a different address must be set (see section Jumpers).

=== Cavaliers d'adresse ===
In most use cases all the jumpers can be left in place.

However, you can change the address of the PiFace by changing the JP1 and JP2 jumpers.

JP1 and JP2 set the address of the board to enable multiple boards to be used together.

The default is board address 0, indicated by the white lines printed next to each address jumper.

[[Fichier:PiFace2-Manuel-Adresses-00.jpg]]

JP1 controls the least significant bit of the address, and JP2 the most significant bit.

[[Fichier:PiFace2-Manuel-Adresses-01.jpg]]

{{PiFace2-Manuel-TRAILER}}
29 917

modifications

Menu de navigation