Modifications

== Contact de pile et électonique ==

== Contact de pile et électonique ==

# With the chassis upside down, push the two double-sided battery contacts in the slots indicated in the picture below.

1. With the chassis upside down, push the two double-sided battery contacts in the slots indicated in the picture below.

{{POLImage|Pololu-Romi-Chassis-Assembler-01.png|800px|Placer les contacts pile doubles}}

{{POLImage|Pololu-Romi-Chassis-Assembler-01.png|800px|Placer les contacts pile doubles}}

# Turn the chassis over and place the four individual battery contact terminals into the chassis from the top side of the battery box. They should rest loosely in their slots when the chassis is upright.

2. Turn the chassis over and place the four individual battery contact terminals into the chassis from the top side of the battery box. They should rest loosely in their slots when the chassis is upright.

{{POLImage|Pololu-Romi-Chassis-Assembler-02.png|800px|Placer les contacts simples (plat et ressort)}}

{{POLImage|Pololu-Romi-Chassis-Assembler-02.png|800px|Placer les contacts simples (plat et ressort)}}

# '''Optional''': If you have electronics that solder to the battery contacts, this is a convenient time to install them. The {{pl|1453|carte de contrôle Romi 32U4}} {{polpl|3544}} (not included) is shown below as an example.

3. '''Optional''': If you have electronics that solder to the battery contacts, this is a convenient time to install them. The {{pl|1453|carte de contrôle Romi 32U4}} {{polpl|3544}} (not included) is shown below as an example.

{{POLImage|Pololu-Romi-Chassis-Assembler-03.png|800px|Installer l'électronique (disponible séparemment) sur le châssis Romi)}}

{{POLImage|Pololu-Romi-Chassis-Assembler-03.png|800px|Installer l'électronique (disponible séparemment) sur le châssis Romi)}}