1 108 octets ajoutés
, 13 avril 2017 à 14:52
{{Pololu-Zumo-Shield-Arduino-NAV}}
{{traduction}}
This example program demonstrates using the magnetometer in the Zumo Shield’s LSM303 3-axis compass module (described in section Section 3.d) to help the Zumo coordinate ninety-degree turns and drive in squares. With the Zumo Shield Arduino Libraries installed, the sketch file can be opened in Arduino by selecting '''Fichier > Exemples > ZumoExamples > Compass'''. This example also requires the [https://github.com/pololu/lsm303-arduino bibliothèque LSM303] to be installed.
Because the batteries, motors, and motor current affect the z axis of the magnetometer much more strongly than the x and y axes, this program calculates the Zumo’s orientation using only the x and y readings from the magnetometer, assuming that the robot is always level. In order to prevent external, locally varying magnetic fields (e.g. from rebar in a concrete floor) from affecting the Zumo’s navigation too much, the program measures the magnetic heading before each turn, then turns ninety degrees relative to that heading.
{{Pololu-Zumo-Shield-Arduino-TRAILER}}