Modifications

Sauter à la navigation Sauter à la recherche
976 octets ajoutés ,  28 avril 2018 à 20:57
Page créée avec « {{Pololu-Senseur-QTR-NAV}} == Introduction == Fichier:Pololu-Senseur-QTR-00.png The Pololu QTR reflectance sensors carry infrared LED and phototransistor pairs that... »
{{Pololu-Senseur-QTR-NAV}}

== Introduction ==
[[Fichier:Pololu-Senseur-QTR-00.png]]

The Pololu QTR reflectance sensors carry infrared LED and phototransistor pairs that can provide analog measurements of IR reflectance, which makes them great for close-proximity edge detection and line-following applications. The modules come as compact, single-sensor units (QTR-1A and QTR-1RC; QTR-L-1A and QTR-L-1RC), 3-sensor arrays (QTR-3A and QTR-3RC), or as 8-sensor arrays (QTR-8A and QTR-8RC) that can be optionally split into a 2-sensor array and a 6-sensor array.

The modules are available in two different output formats: the QTR-xA outputs an analog voltage between 0 and Vcc that can be measured by an analog-to-digital converter (ADC), and the QTR-xRC outputs require a digital I/O line capable of driving the output line high and then measuring the time for the output voltage to decay (which provides an analog measurement of reflectance).

{{Pololu-Senseur-QTR-TRAILER}}
30 711

modifications

Menu de navigation