| Ligne 10 : |
Ligne 10 : |
| | | | |
| | <nowiki> | | <nowiki> |
| − | void printpulses(void) {
| + | void printpulses(void) { |
| | Serial.println("\n\r\n\rReceived: \n\rOFF \tON"); | | Serial.println("\n\r\n\rReceived: \n\rOFF \tON"); |
| | for (uint8_t i = 0; i < currentpulse; i++) { | | for (uint8_t i = 0; i < currentpulse; i++) { |
| − | Serial.print(pulses[i][0] * RESOLUTION, DEC);
| + | Serial.print(pulses[i][0] * RESOLUTION, DEC); |
| − | Serial.print(" usec, ");
| + | Serial.print(" usec, "); |
| − | Serial.print(pulses[i][1] * RESOLUTION, DEC);
| + | Serial.print(pulses[i][1] * RESOLUTION, DEC); |
| − | Serial.println(" usec");
| + | Serial.println(" usec"); |
| | } | | } |
| | // print it in a 'array' format | | // print it in a 'array' format |
| Ligne 22 : |
Ligne 22 : |
| | Serial.println("// ON, OFF (in 10's of microseconds)"); | | Serial.println("// ON, OFF (in 10's of microseconds)"); |
| | for (uint8_t i = 0; i < currentpulse-1; i++) { | | for (uint8_t i = 0; i < currentpulse-1; i++) { |
| − | Serial.print("\t"); // tab
| + | Serial.print("\t"); // tab |
| − | Serial.print(pulses[i][1] * RESOLUTION / 10, DEC);
| + | Serial.print(pulses[i][1] * RESOLUTION / 10, DEC); |
| − | Serial.print(", ");
| + | Serial.print(", "); |
| − | Serial.print(pulses[i+1][0] * RESOLUTION / 10, DEC);
| + | Serial.print(pulses[i+1][0] * RESOLUTION / 10, DEC); |
| − | Serial.println(",");
| + | Serial.println(","); |
| | } | | } |
| | Serial.print("\t"); // tab | | Serial.print("\t"); // tab |
| | Serial.print(pulses[currentpulse-1][1] * RESOLUTION / 10, DEC); | | Serial.print(pulses[currentpulse-1][1] * RESOLUTION / 10, DEC); |
| | Serial.print(", 0};"); | | Serial.print(", 0};"); |
| − | }
| + | } |
| | </nowiki> | | </nowiki> |
| | | | |
| − | I uploaded the new sketch and pressed the Play button on the Apple remote and got the following:
| + | Le nouveau croquis téléversé sur notre Arduino, pressons le bouton "Jouer" de la télécommande et voyons le résutlat que nous allons obtenir: |
| | | | |
| | <nowiki> | | <nowiki> |
| − | | + | int IRsignal[] = { // ON, OFF (in 10's of microseconds) |
| − | | |
| − | int IRsignal[] = { // ON, OFF (in 10's of microseconds)
| |
| | 912, 438, | | 912, 438, |
| | 68, 48, | | 68, 48, |
| Ligne 77 : |
Ligne 75 : |
| | 66, 3012, | | 66, 3012, |
| | 908, 212, | | 908, 212, |
| − | 68, 0}; | + | 68, 0 }; |
| | </nowiki> | | </nowiki> |
| | | | |
| − | We'll try to detect that code. Lets start a new sketch called IR Commander ([http://github.com/adafruit/IR-Commander la version finale du code est disponible sur le GitHub d'AdaFruit]) this will use parts of our previous sketch. The first part we'll do is to create a function that just listens for an IR code an puts the pulse timings into the pulses[] array. It will return the number of pulses it heard as a return-value.
| + | Nous allons essayer de détecter ce code. Essayons de démarrer un nouveau croquis appelé IR Commander ([http://github.com/adafruit/IR-Commander la version finale du code est disponible sur le GitHub d'AdaFruit]) qui utilisera une partie de notre précédent croquis. |
| | + | |
| | + | La première partie écourtera simplement le code Infrarouge et placera les temps d'impulsion dans le tableau pulses[]. Il retournera le nombre d'impulsions détecté comme valeur de retour. |
| | | | |
| | <nowiki> | | <nowiki> |
| − | int listenForIR(void) {
| + | int listenForIR(void) { |
| − | currentpulse = 0;
| + | currentpulse = 0; |
| − | while (1) {
| + | while (1) { |
| | uint16_t highpulse, lowpulse; // temporary storage timing | | uint16_t highpulse, lowpulse; // temporary storage timing |
| | highpulse = lowpulse = 0; // start out with no pulse length | | highpulse = lowpulse = 0; // start out with no pulse length |
| | // while (digitalRead(IRpin)) { // this is too slow! | | // while (digitalRead(IRpin)) { // this is too slow! |
| | while (IRpin_PIN & (1 << IRpin)) { | | while (IRpin_PIN & (1 << IRpin)) { |
| − | // pin is still HIGH
| + | // pin is still HIGH |
| − | // count off another few microseconds
| + | // count off another few microseconds |
| − | highpulse++;
| + | highpulse++; |
| − | delayMicroseconds(RESOLUTION);
| + | delayMicroseconds(RESOLUTION); |
| − | // If the pulse is too long, we 'timed out' - either nothing
| + | // If the pulse is too long, we 'timed out' - either nothing |
| − | // was received or the code is finished, so print what
| + | // was received or the code is finished, so print what |
| − | // we've grabbed so far, and then reset
| + | // we've grabbed so far, and then reset |
| − | if ((highpulse >= MAXPULSE) && (currentpulse != 0)) {
| + | if ((highpulse >= MAXPULSE) && (currentpulse != 0)) { |
| − | return currentpulse;
| + | return currentpulse; |
| − | }
| + | } |
| | } | | } |
| | // we didn't time out so lets stash the reading | | // we didn't time out so lets stash the reading |
| Ligne 105 : |
Ligne 105 : |
| | // same as above | | // same as above |
| | while (! (IRpin_PIN & _BV(IRpin))) { | | while (! (IRpin_PIN & _BV(IRpin))) { |
| − | // pin is still LOW
| + | // pin is still LOW |
| − | lowpulse++;
| + | lowpulse++; |
| − | delayMicroseconds(RESOLUTION);
| + | delayMicroseconds(RESOLUTION); |
| − | if ((lowpulse >= MAXPULSE) && (currentpulse != 0)) {
| + | if ((lowpulse >= MAXPULSE) && (currentpulse != 0)) { |
| − | return currentpulse;
| + | return currentpulse; |
| − | }
| + | } |
| | } | | } |
| | pulses[currentpulse][1] = lowpulse; | | pulses[currentpulse][1] = lowpulse; |
| Ligne 116 : |
Ligne 116 : |
| | currentpulse++; | | currentpulse++; |
| | } | | } |
| − | }
| + | } |
| | </nowiki> | | </nowiki> |
| | | | |