The 8 green screw terminals are inputs and used to detect if a switch or contact is open or closed. An input will register when it is connected to GND. The inputs are labelled on the underside of the board.
+
+
The four switches, labelled S0 to S3, are connected in parallel to the first four (0-3) inputs.
+
+
[[Fichier:PiFace2-Manuel-Entree-00.jpg]]
+
+
=== Connexion de boutons ==
+
To wire up an external button connect the input pin of PiFaceTM Digital 2 to one contact on the button and another wire from GND on PiFaceTM Digital 2 to the other switch contact.
+
+
Check your button’s datasheet to see which pins should be wired up.