29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 185 :
Ligne 185 : + + − + − xxx+ − [[Fichier:Boarduino-Souder-51.jpg]]+ + + + + + + + + + +
ADF-BOARDUINO-SOUDER (voir la source)
Version du 20 novembre 2012 à 22:33
, 20 novembre 2012 à 22:33aucun résumé de modification
[[Fichier:Boarduino-Souder-49.jpg]]
[[Fichier:Boarduino-Souder-49.jpg]]
[[Fichier:Boarduino-Souder-50.jpg]]
If you'd like to take advantage of the auto-reset capabilities added to the Arduino software, install ceramic capacitor '''C6'''.
If you'd like to take advantage of the auto-reset capabilities added to the Arduino software, install ceramic capacitor '''C6'''.
[[Fichier:Boarduino-Souder-50.jpg]]
[[Fichier:Boarduino-Souder-51.jpg]]
Now is a good time to insert the IC
Bend the legs gently against a table and line up the notch in the chip with the notch in the socket. Carefully seat the chip, making sure all of the legs are lined up in the socket.
[[Fichier:Boarduino-Souder-52.jpg]]
[[Fichier:Boarduino-Souder-52.jpg]]
Cut 4 more pieces of header, a 10-pin, 8-pin, 6-pin and 4-pin. Insert them into a solderless breadboard as shown so that the long legs are in the solderless breadboard sockets.
[[Fichier:Boarduino-Souder-53.jpg]]
[[Fichier:Boarduino-Souder-53.jpg]]
Place the Boarduino on top, so that the header matches up with the solder holes in the PCB
[[Fichier:Boarduino-Souder-54.jpg]]
[[Fichier:Boarduino-Souder-54.jpg]]
Solder all of the pins of the header, making sure that the board is sitting flat against the header.
[[Fichier:Boarduino-Souder-55.jpg]]
[[Fichier:Boarduino-Souder-55.jpg]]
[[Fichier:Boarduino-Souder-56.jpg]]
[[Fichier:Boarduino-Souder-56.jpg]]
Carefully remove the boarduino by slowly rocking it back and forth to release it from the solderless breadboard.
You should now try to power it up again, and you will see the green LED light. Press the reset button, the red LED should blink a few times. If you don't see the red light blink make sure the chip is in the right way.
[[Fichier:Boarduino-Souder-57.jpg]]
[[Fichier:Boarduino-Souder-57.jpg]]