The entire project must fit into a can! The size and dimensions are available in CanSat settlement.
The entire project must fit into a can! The size and dimensions are available in CanSat settlement.
−
If you need some help, this page contains various information to create this can.
+
This page contains various ressources from MCHobby and contest participants. Such ressources can help you in finding your ways in building your own setup.
== 3D CanSat ==
== 3D CanSat ==
−
One of participant of the previous CanSat 2018 edition did share some 3D models.
+
* [https://www.google.com/search?q=tinkercad+cansat search for "ThinkerCAD + CanSat"]
+
* [https://www.google.com/search?q=thingiverse+cansat Search for "Thingiverse + CanSat"]
−
Thank to Docopol from Institut Saint Michel for this contribution.
−
−
=== Cansat_BaseModel ===
−
This is a standard CanSat accredit on required dimension.
−
* Diameter: 66mm.
−
* Height: 115mm.
−
The hook firmness is good for the parachute.
−
−
This can have 3mm wall thickness which offer a good balance between we firmness, available space and weight.
−
−
=== Cansat_1.0 ===
−
This modeling is an upgrade of the previous one. It includes small edge to insert circular 59mm PCBs.
−
−
This model did fly at Elsenborn.
−
−
=== Cansat_2.0 ===
−
Composed of right and left part, this allows to use a vertical PCB.
−
−
The PCB size is 108mm height and 58mm weight.
−
−
An additional chamber can be used as ballast. Adding some load may be useful in some circumstance.
−
−
This model have been used for CanSat Europe (Açores).