29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 5 :
Ligne 5 : − +
Pololu-Romi-32U4-Carte-Raspberry (voir la source)
Version du 2 novembre 2019 à 13:12
, 2 novembre 2019 à 13:12→Raspberry Pi interface and level shifters
The Romi 32U4 Control Board was designed to be easy to interface with a Raspberry Pi single-board computer to expand the Romi’s processing power. It has a connector and mounting holes matching the Raspberry Pi HAT (Hardware Attached on Top) specification and is designed to connect to the Model B+ and newer versions of the Raspberry Pi with 40-pin GPIO headers (including the Raspberry Pi 3 Model B and Model A+). A 2×20-pin 0.1″ female header is soldered to the control board, and it ships with a set of four standoffs, screws, and nuts.
The Romi 32U4 Control Board was designed to be easy to interface with a Raspberry Pi single-board computer to expand the Romi’s processing power. It has a connector and mounting holes matching the Raspberry Pi HAT (Hardware Attached on Top) specification and is designed to connect to the Model B+ and newer versions of the Raspberry Pi with 40-pin GPIO headers (including the Raspberry Pi 3 Model B and Model A+). A 2×20-pin 0.1″ female header is soldered to the control board, and it ships with a set of four standoffs, screws, and nuts.
[[Fichier:Pololu-Romi-32U4-Carte-Raspberry-00.jpg|640px]]
[[Fichier:Pololu-Romi-32U4-Carte-Raspberry-00.jpg|480px]]
== Communication I2C ==
== Communication I2C ==