Modifications

== Alimentation ==

== Alimentation ==

Les points d'alimentation de la carte de contrôle Romi sont disponibles en différents emplacement de la carte. Si vous alimentez d'autres périphériques depuis VSW, then they will be powered whenever the control board’s power is in ON, and they will receive whatever voltage the batteries are outputting. If you power them from VREG, they will get 5 V power whenever the batteries are installed and the power is on (but they cannot be powered from USB). If you power them from a 5V pin, then they will receive 5V power whenever the control board’s logic components are powered. If you power them from 3V3, they will receive 3.3V power whenever the control board’s logic components are powered. For more information about these power nodes and how much current they can provide, see Section d'[[Pololu-Romi-32U4-Carte-Alimentation|alimentation]].

Les points d'alimentation de la carte de contrôle Romi sont disponibles en différents emplacement de la carte. Si vous alimentez d'autres périphériques depuis VSW alors ils seront alimentés quelque soit la position de l'interrupteur d'alimentation (ON) et ces périphériques recevrons la tension d'alimentation produite par les piles.  

 

Si vous alimentez vos périphériques depuis VREG alors ils recevrons une tension d'alimentation de 5V lorsque les piles sont installées et l'interrupteur d'alimentation sur la position ON (mais ils ne seront pas alimentés depuis l'USB). ****** If you power them from a 5V pin, then they will receive 5V power whenever the control board’s logic components are powered. If you power them from 3V3, they will receive 3.3V power whenever the control board’s logic components are powered. For more information about these power nodes and how much current they can provide, see Section d'[[Pololu-Romi-32U4-Carte-Alimentation|alimentation]].

It is also possible to add your own power switch to control power to the Romi 32U4 Control Board, as described in Section d'[[Pololu-Romi-32U4-Carte-Alimentation|alimentation]].

It is also possible to add your own power switch to control power to the Romi 32U4 Control Board, as described in Section d'[[Pololu-Romi-32U4-Carte-Alimentation|alimentation]].