29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 163 :
Ligne 163 : − + − + − + − +
ENG-CANSAT-PICO-USER-GUIDE (voir la source)
Version du 20 février 2022 à 23:34
, 20 février 2022 à 23:34→Special Pins
* '''RUN''' - xxx. Act like '''Reset''' pin.
* '''RUN''' - This pin acts like '''Reset''' pin. Tie it to the ground and the the Pico immediately stops.
* '''3V3_EN''' - Already mentionned. Deactivate the 3.3V power regulator when tied to the ground.
* '''3V3_EN''' - Deactivate the 3.3V power regulator when tied to the ground. This will completely switch off the Pico power
* '''GP23''' - PowerSave internal board pin. Depending on the conditions, this pin can reduce the power consumption of the board.
* '''GP23''' - PowerSave internal board pin. Depending on the conditions, this pin can reduce the power consumption of the board.
* '''GP24''' - Already mentionned. This internal board pin is High when the board is connected to a computer or wall adapter (when VBus = 5V).
* '''GP24''' - This internal board pin is pulled HIGH when the board is connected to a computer or wall adapter (when VBus = 5V).
* '''GP25''' - Board LED
* '''GP25''' - Controls the onboard LED. The GP25 is not wired to a board pin.
=== Debug Pins ===
=== Debug Pins ===